drone receivers

The following is a list of the drone receivers (which cost less than $500). This list is regularly updated with the current market leaders’ models. Our editors choose everything in our database and keep it up to date on a regular basis.

This page provides a list of the top 15 drone receivers that will undoubtedly assist you in finding your ideal match. Let’s begin with evaluations right now, without spending much time!

If you’re looking for a basic drone receivers, this top list is your best bet. It has an average rating of 4 stars after over 1200+ customer reviews and is one of our most popular items lately!

If you’re searching for a drone receivers, this list is the place to go. We’ve compiled a list of 15 of our favorites so you can make an informed decision. If anything specific comes to mind or you just want some advice, keep reading below:

Top 15 List of drone receivers is given below

We’ve consulted with renowned professionals who have in-and-out expertise about the drone receivers. We picked a product with uncommon features that you haven’t heard of before so that your purchasing experience would be interesting! Our team went through more than 100 options to make this list just right for you.

1
SoloGood FPV Monitor 4.3inch 800 x 480 IPS 5.8ghz Drone Receiver Monitor with DVR Built in Battery 40CH for RC FPV Drone
  • This FPV monitor is 800*480 high-definition screen, 16:9 display ratio, bring the best image display effect.
  • Use 4.3 inch IPS screen, better display effect, not easy to reflect light outdoors, more power saving.
  • This drone monitor have an automatic search signal function, simple operation and stable performance.
  • High sensitivity 5.8G reception, dual antenna reception, signal more stable.
  • Support 5-23V wide voltage charging, compatible mobile power supply or 2S/3S battery as backup power supply, long working time, accessories include USB cable, XT60 plug cable
2
FrSky R-XSR Ultra SBUS/CPPM D16 16CH Mini Redundancy Receiver for RC Multirotor FPV Racing Drone
  • Notes: Flash the internal RF module of the ACCST transmitter to V2 version, and then bind the XM+ RXSR receiver. Ultra mini size and light weight
  • Supports redundancy function Support telemetry and Smart Port enabled
  • IPEX connector, replaceable antennas
  • Switchable SBUS/ CPPM signal output
  • US-BASED CUSTOMER SERVICE & TECHNICAL SUPPORT - Should you ever run into any problems or need assistance, we are here to help! We offer 24/7 e-mail support and are available for phone calls Monday-Friday between the hours of 9 am - 4 pm PST. Providing outstanding customer service is our number one priority.
3
Fli14+ 2.4G 14CH AFHDS 2A IBUS Micro FPV Receiver for Flysky Drone Receiver with OSD RSSI PA for FPV Racing RC Support Flysky i4 i6 I6X i6S i10,iT4S,Eachine I6,Turnigy I6S
  • This is a small and lightweight 14ch drone receiver for fpv racing, Compatible with FS-i4, FS-i6,FS-I6X,FS-i6S, FS-i10,FS-iT4S, Eachine I6,Turnigy I6S, Turnigy Evolution
  • 14 channel, with OSD, RSSI, PA(power amplification) function at a affordable price
  • With stock two antenna its range can reach about 500m(actual range may vary)
  • Features AFHDS-2A protocol , Output: IBUS
  • Weight: 1.7g, Dimensions: 25mm*15mm*5mm, Suit for Micro Quadcopter, inductrix frame, tiny whoop frame,and other micro drone frame.
4
Radiolink R6DS 2.4GHz RC Receiver 6/10 Channels SBUS/PWM/PPM for Drone Airplane Fixed Wing AT9S/AT9S Pro/AT10/AT10II Transmitter RX
  • Excellent Anti-interference: with DSSS&FHSS pseudo random algorithm to give R6DS with excellent anti-interference ability.
  • 6/10 Channels: Support PWM/PPM/SBUS signal output, ideal for most aircraft. Make sure menu SYSTEM CH selection is 10CH when it works with AT10/AT10II transmitter, or it won't work well.
  • Fast Response: High resolution ratio of 4096, the stability of 0.5us, to provide a quicker, low-latency connection for the driver.
  • Press to Bind: No need old bind plug and any radio setting, only press bind button for 1 second after power up radio and receiver. High resolution ratio of 4096, stable signal and fast response.
  • Anti-polarity Protection: With reverse polarity protection, not damage the receiver even you insert wrong polarity.
Sale5
FLYSKY FS-i6X 10CH 2.4GHz RC Transmitter Controller with iA6B Receiver Upgrade Cable for RC Boat Racing Drone
  • Please note: Flysky FS-i6x is default 6CH with fs-ia6b receiver. If you have 10 channels receiver fs-ia10b, that you can open to 10 channels.
  • Bidirectional Communication --- Capable of sending and receiving data, each transmitter is capable of receiving data from temperature, altitude and many other types of sensors, servo calibration and i-BUS Support
  • Multi-channel Hopping Frequency --- This system bandwidth ranges from 2.408GHz to 2.475GHz. This is divided in 135 channels. Each transmitter hops between 16 channels (32 for Japanese and Korean version) in order to reduce interference from other transmitters.
  • Omni-directional Gain Antenna --- The high efficiency Omni-directional high gain antenna cuts down on interference, while using less power and maintaining a strong reliable connection
  • Low Power Consumption --- The system is built using highly sensitive low power consumption components, maintaining high receiver sensitivity, while consuming as little as one tenth the power of a standard FM system, dramatically extending battery life.
6
FrSky XM Plus Mini Receiver up to 16CH 1.6g Full Range fit for Micro Drone XM
  • Notes: Flash the internal RF module of the ACCST transmitter to V2 version, and then bind the XM+ RXSR receiver.This insanely tiny 2.4GHz diversity receiver available from FrSky is the next big thing in miniaturization of racing craft.Perfect for those racers who are looking to lower their AUW.
  • XM Plus Receiver supports failsage function for all channels. Protect your perfectly henever the control signal is lost for a period of time
  • Up to 16CH from SBUS ( CH1-CH15 for PWM, CH16 RSSI for FC,such as F3, Naze32 flight controller ). Compatible ------ Compatible with Frsky X9D Plus X9E X12S transmitter.
  • weight:1.6g, Dimension: 21.5*12*3.5mm(L x W x H).Frsky XM Plus mini receiver is perfect for those racers who are looking to lower their AUW, especially for FPV racing drone, mini drone, such as 130 110 drone .
  • FrSky XM Plus is dual antenna ( Frsky XM is only one), with dual antenna, it has strong anti-interference, make sure you can control your drone anytime.If you have any problem, feel free to contact us with detailed information and bar code. Our technology support team will help check and solve the problem. In addition, we also have US support center. If you want, you can also call them or return it back to them and they can fix it for you.
7
Radiolink R8FM 8 Channels 2.4GHz Micro RC Receiver SBUS/PPM for Mini FPV Racing Drone, Quad, Aircraft T8S/T8FB Transmitter
  • Strong Anti-interference: with frequency hopping spread spectrum (FHSS) pseudo random algorithm to give R8SM with excellent anti-interference ability.
  • 8 Channels: with standard SBUS/PPM signal output, high resolution ratio of 4096, fast respone for all channels.
  • Long Range Control: stable remote control distance up to 1.2 mile in the air. (actually control distance depends on the environment.)
  • Super Mini Size: 0.09oz only 0.78*0.59*0.2inch, light weight and tiny size for mini drone, such as 130 120 110.
  • Easy to Bind and Safe Protection: only 1 second bind to T8S/T8FB transmitter. The voltage protection software technology of RadioLink ensures both transmitter and receiver are protected from a reverse polarity connection.
8
GPS Module GPS NEO-6M(Ar duino GPS, Drone Microcontroller GPS Receiver) Compatible with 51 Microcontroller STM32 Ar duino UNO R3 with IPEX Antenna High Sensitivity for Navigation Satellite Positioning
  • How to use the template, the link is obtained in the product description
  • ★Note: This GPS module will not search for signals when the weather is bad, and it will not search for stars indoors. When using it, please make sure that the GPS module is in an open location.
  • GPSBaud needs to be set to 9600 instead of 4800; PPS pin is not needed unless using the GPS to drive a hardware high precision clock; GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage.
  • With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect; With IPEX antenna interface, the default distribution of active antenna, can be quickly positioned.
  • USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna!
9
BODAJING Flysky FS-I6S 10ch 2.4G AFHDS 2A RC Transmitter Control w/ FS-iA6B Receiver for RC Drone Quadcopter
  • Low Power Consumption : The system is built using highly sensitive low power consumption components,maintaining high receiver sensitivity,while consuming as little as one tenth the power of a standard FM system,dramatically extending battery life.
  • Bidirectional Communication : Capable of sending and receiving data,each transmitter is capable of receiving data from temperature,altitude and many other types of sensors,servo calibration and i-BUS Support.
  • Multi-channel Hopping Frequency : This systems width ranges from 2.4055GHz to 2.475GHz. This is divided in 140 channels. Each transmitter hops between 16 channels (32 for Japanese and Korean versions) in order to reduce interference from other transmitters.
  • Omni-directional Gain Antenna : The high efficiency Omni-directional high gain antenna cuts down on interference,while using less power and maintaining a strong reliable connection.
  • Unique ID Recognition System : Each transmitter and receiver has its own unique ID. Once the transmitter and receiver have been paired,they will only communicate with each other,preventing other systems accidentally connecting to or interfering with the system's operation.
10
Radiolink AT10II 12 Channels RC Transmitter and Receiver R12DS 2.4GHz Radio Remote Controller Airplane Voltage Monitor for RC FPV Racing Drone, Quad, Helicopter, Car (Mode 2 Left Hand Throttle)
  • Excellent Anti-interference: DSSS&FHSS communication technology and 7dBi high gain antenna make AT10II transmitter with stable transmission signal and the control range up to 2.5 miles(4km) in air. Responding latency as low as 3ms.
  • Features: 12 channels, Fail-safe Setting, Battery Voltage Telemetry, RSSI, Dual/Triple Rates, End Point Adjustment, Switch Customized, Reverse Polarity Protection, Multiple Battery Compatible, Channels Mix Control, etc.
  • User Friendly Interface: support basic menu and advance menu for different user needs. No need radio setting to bind transmitter with receivers.
  • Adapts to Wide Range of Airplane: compatible with receiver R12DS, R12SM, R9DS, R6DS, R6DSM. 15 models storage and quicks to switch models: helicopter, quadcopter, fixed wing, glider, cars, boats.
  • Safety Remind: Signal Strength Indicator (RSSI) Alerts, low voltage alarm, failsafe protection. DD sounds and words alarming display on the 3.5’’ LCD screen to remind when you are in noisy surroundings.
11
BETAFPV ExpressLRS 868MHz OpenTX Mini Nano Receiver High Refresh Rate Long Range Performance for FPV Racing Drone
  • 【ExpressLRS】 ExpressLRS is an open-source RC link for RC applications, based on Semtech Lora SX127x or SX1280 hardware for RX and TX respectively. This makes ExpressLRS one of the fastest RC links available while still offering long-range performance.
  • 【ExpressLRS Receiver】 BETAFPV Nano receiver is based on the ExpressLRS project, an open-source RC link for RC applications which aims to achieve the best possible link performance in both speeds, latency, and range suit for ELRS TX module or Nano bay, etc.
  • 【Crossfire Serial Protocol 】 ExpressLRS uses the Crossfire serial protocol (AKA CRSF protocol) to communicate between the receiver and the flight controller board. So make sure your flight controller board supports the CRSF serial protocol. How to set up the CRSF protocol can be viewed on the fourth page of the manual.
  • 【Nano Size】 This receiver only has 0.7 grams and the volume is 12mm*19mm which is very suitable for Tiny whoop because of the ultra light and Nano size.
  • [Configuration & Bind] Nano receiver could enter binding status by power on/off three times. Step: Plugin and unplug nano receiver three times; Make sure the LED is doing a quick double blink, which indicates the receiver is in bind mode; Make sure the RF TX module or radio transmitter enter binding status, which sends out a binding pulse; If the receiver has a solid light, it's bound.
12
Radiolink AT9S Pro 10/12 Channels 2.4GHz RC Transmitter and Receiver R9DS Radio Remote Long Range Control for FPV Racing Drone/Quad/Airplane and More (Mode 2 Left Hand)
  • Excellent Anti-interference--DSSS&FHSS communication technology makes AT9S Pro transmitter with stable transmission signal and long range control up to 2.1 miles(3.4km) in air.
  • Powerful Features--10/12 channels, telemetry(work with PRM-03), throttle cut, dual-rate, switch assignments, programmable mix control, fail safe, reverse polarity protection, multiple model options, etc.
  • Safety Remind- RSSI alert, radio/receiver/model low voltage alarm. With DD sounds, vibration, and words alarming display on the LCD screen to remind when you are in noisy surroundings.
  • Additional Function--3 in 1 multi-function port, support most of simulator, TBS Crossfire Protocol (915 Module), Wireless Trainer mode support. (all sold separately)
  • Equipped with RC airplane, helicopter, glider, multirotor, car and boat programming and 15-model memory capacity. Compatible with R12DS, R12DSM, R9DS, R6DS, R6DSM receivers.
Sale13
GPS Module Receiver,Navigation Satellite Positioning NEO-6M (Arduino GPS, Drone Microcontroller, GPS Receiver) Compatible with 51 Microcontroller STM32 Arduino UNO R3 with Antenna High Sensitivity
  • With a USB interface, you can directly use the phone data cable on the computer point of view positioning effect; With IPEX antenna interface, the default distribution of active antenna, can be quickly positioned.
  • GT-U7 main module GPS module using the original UBLOX 7th generation chip, Software is compatible with NEO-6M. GT-U7 module, with high sensitivity, low power consumption, miniaturization, its extremely high tracking sensitivity greatly expanded its positioning of the coverage.
  • USB directly connected to the computer, That is, with the host computer-owned serial port function, no need for external serial module, send IPX interface active antenna!
  • If you have any issue when using our product,or you need product use documentation, please contact us directly for assistance.we will reply your problem in 24 hours.We try our best to provide the most professional service for each customer.
14
Flysight Black Pearl Diversity Monitor RC801 FPV Monitor with DVR HDMI in 5.8Ghz 40CH 7inch FPV Screen Receiver Built in Battery with Sunshade Hood for RC Racing Drone DJI Phantom Airplane (SMA ANT)
  • 【FPV Performance】:Flysight Black Pearl RC801 FPV diversity monitor 5.8Ghz screen built-in high sensitivity multi-channel diversity receivers,which is currently unprecedented;Compatible with most VTX,no “ blue screen” when the signal gets weak,it is compatible with DJI phantoms and Inspire. You can also still use black pearl monitor with some goggles via the video output port.
  • 【High Quality Display】: 7inch HD LCD matte screen monitor high resolution 1024*600 with with a contrast of 700:1 to give you a bright high quality display ,along with an AV input, the Black Pearl Monitor also features an HDMI input that accepts signals up to 1920 x 1080 at 60 Hz. The monitor scales horizontally and vertically and has a zoom function.
  • 【Comfortable Outside Using 】: A fold-able efficient rigid sun hood, easy setup,easy to open it for outsoodr using even if on very bright day ,it makes you see screen clearly; With integrated 11.1V/1000mAh removable and rechargeable Li-Po battery,you don't need to worry about lots of wires or batteries to power each individual part.  All-In-One compact unit ideal for the serious FPV flyers.
  • 【5.8Ghz Diversity Receiver】: The built-in 5.8Ghz Diversity receiver of Flysight Black Pearl FPV monitor will always ensure you get the best video signal and also allows you to use two different antennas,not affected by 2.4Ghz R/C Radios .You can also setup the monitor to receive 2 different channels at the same time.The FlySight 7" Black Pearl Diversity Monitor with integrated battery is a great choice for FPV pilots.
  • 【Integrated Built-in DVR 】: Record FPV footage with the integrated built in DVR,In outdoor flight, your drone is flying fast as a bird in the sky. You need keep an eye on it to assure its safely. Flysight Black Pearl can receive OSD data on its screen for you, which helps a lot!
15
Radiolink R12DSM 2.4G 12 Channels RC Receiver SBUS/PPM Long Range Control for FPV Micro Racing Drone Quadcopter
  • Strong Anti-interference: Dual antenna and DSSS&FHSS pseudo random algorithm to give R12DSM with excellent anti-interference ability.
  • 12 Channels: support universal SBUS/PPM standard signal for FPV racing drone. Make sure SYSTEM CH seletion is 12CH mode when it works with AT9S/AT9S Pro transmitter, otherwise that will cannot work.
  • Long Range Control: stable remote control range up to 2.4 miles in the air with AT10II transmitter.
  • Super Mini Size: light weight and tiny size for FPV mini drone, such as 130mm, 120mm.
  • Quick to Bind and Anti-polarity Protection: only take 1 second to bind with rc transmitter and no need any setting. With reverse polarity protection circuit, not damage the receiver even you insert wrong polarity.

Expert testers evaluate the goods. They’ve put them to the test in settings that are tailored to your exact demands. The reviews are public, so you may rest confident that they know what they’re talking about when it comes to choosing a new software solution!

Leave a Reply