fpv drone flight controllers

The following is a list of the fpv drone flight controllers (which cost less than $500). This list is regularly updated with the current market leaders’ models. Our editors choose everything in our database and keep it up to date on a regular basis.

This page provides a list of the top 15 fpv drone flight controllers that will undoubtedly assist you in finding your ideal match. Let’s begin with evaluations right now, without spending much time!

If you’re looking for a basic fpv drone flight controllers, this top list is your best bet. It has an average rating of 4 stars after over 1200+ customer reviews and is one of our most popular items lately!

If you’re searching for a fpv drone flight controllers, this list is the place to go. We’ve compiled a list of 15 of our favorites so you can make an informed decision. If anything specific comes to mind or you just want some advice, keep reading below:

Top 15 List of fpv drone flight controllers is given below

We’ve consulted with renowned professionals who have in-and-out expertise about the fpv drone flight controllers. We picked a product with uncommon features that you haven’t heard of before so that your purchasing experience would be interesting! Our team went through more than 100 options to make this list just right for you.

1
T-MOTOR Mini F7 Stack (Mini F45A+ Mini F7), Flight Control, Flight Controller Stack for FPV Drone Motor
  • Mini F45A+ Mini F7 Motor has s Strong performance-Matching with T-MOTOR F45A Mini 4IN1 ESC you will get better flying experience.
  • This Mini F7 Stack Motor comparing with standard version FC is lighter and stronger (33% lighter and 41% smaller).
  • This Mini F7 Stack brushless motor has high-performance 32-BIT main control with fast response, matching with BLHELI32 firmware will bring you fantastic flying experience.
  • This Flight controller integrating dual BEC plug and play without welding Provide power support for 5V equipment such as receiver, analog camera, analog video transmitter programmable LED light bar 10V can provide stable power supply support for DJI digital high-definition video transmitter.
  • This Flight controller has integrating pit switch function---you can on&off analog video transmitter with OBTP operation via remote after setting.
2
Aocoda-RC F7 Mini Flight Controller 20x20mm Stack Mounting 3-6S Lipo OSD Barometer 16Mb Blackbox for FPV Quadcopter Drones
  • Aocoda-RC F7 mini Flight Controller Board : fits for FPV Quadcopter Drones
  • Main control chip: STM32F722RET6,MPU: MPU6500,Barometer: BMP280
  • Input voltage: 3-6S Lipo;Power output: 5V/2.5A, 9V/3A
  • >PCB size: 28x28mm, mounting hole 20mm;20x20mm Mounting
  • Firmware: inav_3.0.2_AOCODARCF722MINI
3
TCMMRC 2-6s Mini Flight Tower System 69 Flight Controller MPU6000+ 4 in 1 20A ESC E2069 BLHeli_S for FPV Racing Drone Quadcopter
  • � 〖 Unique Design 〗: This flight tower is specially designed for mini FPV racers. It is mini new compact and concentrated into a two-layer tower structure.
  • � 〖 Latest Features 〗: The mini FC and ESC neatly stack together and highly integrated with all the latest features. It has optimized internal circuitry, which makes your build easy to assemble and it has a cleaner look.
  • � 〖 Easy to Use 〗:This ESC is very easy to solder, and the flight control has multiple ports, no soldering, just plug in the port line. This is convenient for beginners.
  • � 〖 Advanced 〗: F4 flight control has been optimized overall. It can upgrade firmware. The built-in OSD chip helps to monitor the status of the flight data at any time.
  • � 〖 Professional 〗: 4 IN 1 20A BLHeli_S ESC supports Dshot600 and Oneshot125. It supports 2-4S Input voltage.
4
brogtrol M3 Anti-Vibration Fixed Screws Mounting Hardware Spacer Standoff for FPV Drone Flight Controller 20Pack
  • 1.High quality flight controller anti-vibration fixed screw.
  • 2.Material: Rubber and Ultra Hard and Durable Alloy Steel and brass.
  • 3.The screws make your quadcopter more stable,good solution to deal with flight controller vibration woes.
  • 4.Easy to install, perfect fit, and significant vibration elimination.
  • 5.Compatible With:QAV250 QAV-R 220 Flight Controller For Naze32 CC3D F3 PDB PCB Power Distribution Board.
5
HGLRC Zeus5 AIO 1S 2S with WiFi Function F411 Flight Controller 5A BLS 4in1 ESC for Whoop Toothpick FPV Racing Drone Quadcopter
  • 【WIFI tuning】 Built-in WIFI function is more convenient to adjust parameters.
  • 【Tiny size】 Ultra-lightweight design integrating F411 flight control and 4-in-1 ESC.
  • 【Support receiver 】Support direct welding installation of receivers such as TBS NANO, XM+, etc.
  • 【Easy to connect 】It supports two motor connection methods, direct plug and wire bonding.
  • 【Why Choose Us 】 We are the Original HGLRC manufactory , If there are any question or need help , just feel free contact us , we will always here help you out within 24 hours . Choose us risk free today. Click the Orange Button to Buy Now 🙂
6
T-Motor Mini F7 Flight Controller (HD +OSD +VTX Switch) for FPV Drone Motor
  • 1.Comparing with standard version FC, T-Motor Mini F7 Flight Controller is more lighter and stronger. Mini Body has strong performance. Matching with T-MOTOR F45A MINI 4IN1 ESC you will get better fly experience.
  • 2.Comparing with standard version FC, T-Motor Mini F7 Flight Controller is more lighter and stronger. T-Motor Mini F7 Flight Controller formidable operational capability and high speed F722 main control matching with low noise and high sensitivity MPU6000 gyroscope.
  • 3.Mini F7 Flight Controller provide power support for 5V equipment such as receiver, analog camera, analog video transmitter programmable LED light bar 10V can provide stable power supply support for DJI digital high-definition video transmitter,.
  • 4.Support current carious mainstream throttle signals DSHOT150/SDHOT300/SDHOT600/PROSHOT1000 and backward-campatible with Oneshot125/Oneshot42/Multshot and common PWN signals.
  • 5.Integrating PIT SWITCH Function---you can turn on&off analog video transmitter with OBTP operation via remote after setting.
7
Radiolink AT10II 12 Channels RC Transmitter and Receiver R12DS 2.4GHz Radio Remote Controller Airplane Voltage Telemetry for RC FPV Racing Drone, Quad, Helicopter, Car (Mode 2 Left Hand Throttle)
  • Excellent Anti-interference: DSSS&FHSS communication technology and 7dBi high gain antenna make AT10II transmitter with stable transmission signal and the control range up to 2.5 miles(4km) in air. Responding latency as low as 3ms.
  • Features: 12 channels, Fail-safe Setting, Battery Voltage Telemetry, RSSI, Dual/Triple Rates, End Point Adjustment, Switch Customized, Reverse Polarity Protection, Multiple Battery Compatible, Channels Mix Control, etc.
  • User Friendly Interface: support basic menu and advance menu for different user needs. No need radio setting to bind transmitter with receivers.
  • Adapts to Wide Range of Airplane: compatible with receiver R12DS, R12SM, R9DS, R6DS, R6DSM. 15 models storage and quicks to switch models: helicopter, quadcopter, fixed wing, glider, cars, boats.
  • Safety Remind: Signal Strength Indicator (RSSI) Alerts, low voltage alarm, failsafe protection. DD sounds and words alarming display on the 3.5’’ LCD screen to remind when you are in noisy surroundings.
8
BETAFPV F4 1S Brushed Flight Controller with SPI Frsky Receiver OSD Smart Audio for FPV Tiny Whoop Micro Racing Drone
  • The world's first compatible BetaFlight OSD, FrSky Rx, BetaFlight firmware, born for acro flight controller for the Micro Whoop or Blade Inductrix quadcopter.
  • Built-in SPI Frsky D16 protocol native receiver, compatible with almost ALL Frsky radios(e.g. Taranis X9D/X9D Plus/X7) or Frsky compatible transmitter module
  • The flight controller board comes pre-flashed with Betaflight firmware, and pre-soldered 55mm power cable pigtail with JST-PH 2.0 connector, AKA PowerWhoop connector. Designed to work with current Tiny Whoop or Blade Inductrix setups
  • Betaflight OSD (on screen display) is integrated in BETAFPV F4 brushed flight controllers that shows important flight data on your FPV feed, such as battery voltage, current draw and much more. You can even use it as a menu to change your quad’s PID, rates, filters and other settings.
  • Any technical issue or support is needed please feel free to contact me. For some basic guidance and typical FAQ, please visit our official website or feel free to contact us.
9
BETAFPV ELRS 2.4G V2.0 F4 1-2S 12A AIO Brushless Flight Controller with Dipole T Antenna Compatible for 1S Ultra-Lightweight 3" Toothpick Drones HX115 SE FPV Quad or 85mm Racing Drone Beta85 Pro 2
  • 【Upgraded】Compared with BETAFPV F4 1-2S 12A AIO Brushless Flight Controller ELRS 2.4G V1.0, the V2.0 version supports both 1S and 2S batteries now, which can provide pilots with more smoother and more powerful actions
  • 【Compatible Drones】The FC is compatible with 1S 3" toothpick drone HX115 SE FPV quad and Beta85 Pro 2 whoop drone at the same time. Since the V2.0 version modifies the shape of the board to support 85mm whoop frame
  • 【1-2S 12A ESC】Most of the 1S flight controllers on the market come with 5A ESC, this FC especially integrates 1-2S 12A ESC which can provide more sufficient power for 3" toothpick drones 85mm whoop drones
  • 【Configuration】This flight controller comes with a built-in current meter, 2 programmable RGB LEDs, and an SPI ExpressLRS receiver. Meanwhile, all the pads are left for the external receivers with UART1 and UART2, for buzzers, etc
  • 【Technical Support & Warranty】We have a professional team and considerate after-sales service. If you have any questions, you can contact us by email, and we will definitely reply to you within 24 hours. We offer a warranty for all goods within 3 months!
10
iRCMATRC Stretchy Soft M3 Rubber Damper Balls Anti-Vibration Washer Damping Spacer for F4 F7 FPV Racing Flight Controllers RC Drone Accessories (60pcs) (Mix Color (Black, Blue and Purple))
  • Made of high quality rubber for lasting performance nice and soft and stretchy.
  • It fits for latest F4 F7 flight controllers which are with M3 assembling holes.
  • It is made of high quality rubber, color: blue, purple, black, weight: around 8g/pack.
  • Have these rubber spacers to take out vibrations and provide flexibility to the electronics.
  • Note: Not suitable for F4 with OSD 8K Flight Controllers.

Expert testers evaluate the goods. They’ve put them to the test in settings that are tailored to your exact demands. The reviews are public, so you may rest confident that they know what they’re talking about when it comes to choosing a new software solution!

Leave a Reply